User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

SmartStream:Guides:Humax Freesat Old [2019/06/18 20:30] (current)
Line 1: Line 1:
 +====== Humax Freesat - SmartStream ====== 
 +\\ 
 +Here you can find SmartStream setup information for your chosen device and also which services you can access whilst using SmartStream. 
 +\\ 
 +\\ 
 +You can use the Table of Contents on the right hand side of this window to navigate between the different sections. 
 +\\ 
 +\\ 
 +---- 
 +===== Install Guide ===== 
 +\\ 
 +**__//Step 1//__** 
 +\\ 
 +Choose the closest SmartStream DNS server to your current location using the below list, you will need this later. 
 +\\ 
 +\\ 
 +<box 90% round orange>​ 
 +\\ 
 +<WRAP centeralign>​[[https://​www.streamvia.com/​clientarea/​knowledgebase/​96/​View-All-SmartStream-DNS-Server-Options.html|View All SmartStream DNS Servers]]</​WRAP></​box>​ 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 2//__** 
 +\\ 
 +Retrieve your VPN username and password, if you are a new member this is contained in the **StreamVia Account Information** email you received after ordering. 
 +\\ 
 +\\ 
 +<box 90% round green> 
 +\\ 
 +<WRAP centeralign>​**[[https://​www.streamvia.com/​clientarea/​clientarea.php?​action=products|Existing member or cannot find the email? Click here to retrieve your VPN password]]**</​WRAP></​box>​ 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 3//__** 
 +\\ 
 +Press **//​Menu//​** on your Freesat remote control. 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 4//__** 
 +\\ 
 +Go to **//​System//​** 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 5//__** 
 +\\ 
 +Choose **//​Network//​** 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 6//__** 
 +\\ 
 +Press **//​Configure Network//​** 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 7//__** 
 +\\ 
 +Choose **//​Configure IP//** 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 8//__** 
 +\\ 
 +Make a note of **all** current settings i.e IP Address, Netmask, Router/​Gateway,​ you will need this information shortly. ​ Be very careful with typing mistakes. 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 9//__** 
 +\\ 
 +Choose **//​Manual//​** 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 10//__** 
 +\\ 
 +Enter the above settings you noted, i.e IP address, Netmask, Gateway/​Router,​ instead of the zeros it defaults to, be *very* careful with what is entered 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 11//__** 
 +\\ 
 +Navigate down to **DNS Address** and fill in the DNS server fields with the SmartStream DNS server you chose in Step 1 - overwriting any numbers that are already there. ​ Then, click **//​Done//​** 
 +\\ 
 +\\ 
 +<box 90% round red> 
 +\\ 
 +<WRAP centeralign>​ 
 +**Only the SmartStream DNS servers should be listed, delete any others**</​WRAP></​box>​ 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 12//__** 
 +\\ 
 +Press **//​Apply//​**,​ then reboot the Freesat receiver. 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 13//__** 
 +\\ 
 +Use the below link to sign in to SmartStream using your VPN username and password, this will activate SmartStream for your current broadband IP address. ​ It is recommended you do this from a computer. 
 +\\ 
 +\\ 
 +Should your broadband connection IP address change (if your router restarts or your ISP resets your connection) you will need to repeat this step of signing in, to update our systems. 
 +\\ 
 +\\ 
 +<box 90% round orange>​ 
 +\\ 
 +<WRAP centeralign>​[[https://​smartstream.streamvia.com|Sign in to SmartStream]]</​WRAP></​box>​ 
 +\\ 
 +\\ 
 +\\ 
 +\\ 
 +---- 
 +===== Removal Guide ===== 
 +\\ 
 +**__//Step 1//__** 
 +\\ 
 +Press **//​Menu//​** on your Freesat remote control. 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 2//__** 
 +\\ 
 +Go to **//​System//​** 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 3//__** 
 +\\ 
 +Choose **//​Network//​** 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 4//__** 
 +\\ 
 +Press **//​Configure Network//​** 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 5//__** 
 +\\ 
 +Choose **//​Configure IP//** 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step 6//__** 
 +\\ 
 +Choose **//​Automatic//​** 
 +\\ 
 +\\ 
 +\\ 
 +**__//Step //__** 
 +\\ 
 +Press **//​Apply//​**,​ then restart the Freesat receiver 
 +\\ 
 +\\ 
 +\\