User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
SmartStream:Guides:AmazonFireTV_temp [2018/07/30 16:03]
streamvia
SmartStream:Guides:AmazonFireTV_temp [2019/06/18 20:30] (current)
Line 1: Line 1:
 ====== Amazon Fire TV - SmartStream ====== ====== Amazon Fire TV - SmartStream ======
 \\ \\
-{{ :​red-arrow.png}} 
 Here you can find SmartStream setup information for your chosen device and also which services you can access whilst using SmartStream. Here you can find SmartStream setup information for your chosen device and also which services you can access whilst using SmartStream.
 \\ \\
Line 73: Line 72:
 **__//Step 7//__** **__//Step 7//__**
 \\ \\
-Configure the **Gateway** you noted down in Step 5+Configure the **IP Address** you noted down in Step 5
 \\ \\
 \\ \\
Line 79: Line 78:
 **__//Step 8//__** **__//Step 8//__**
 \\ \\
-If your Subnet Mask was 255.255.255.0,​ configure **24* for the Network Prefix Length. ​ If it was something else, please email us the photo from Step 5.+If your Subnet Mask was 255.255.255.0,​ configure **24** for the Network Prefix Length. ​ If it was something else, please email us the photo from Step 5.
 \\ \\
 \\ \\
Line 154: Line 153:
 **__//Step 3//__** **__//Step 3//__**
 \\ \\
-Go the **//​Settings//​** then select **//​System//​** and finally **//​Network//​**. +If your device ​is not already connected to your network, please connect it now. Make sure you have internet accessalbeit geo-blocked internet access.
-\\ +
-\\ +
-If **System** does not exist on your device, ​go straight into **//​Network//​** from the **//​Settings//​** menu.+
 \\ \\
 \\ \\
Line 163: Line 159:
 **__//Step 4//__** **__//Step 4//__**
 \\ \\
-Select your Wi-Fi network and forget Wi-Fi network by pressing ​the button with 3 lines on it on the remote, then press the **//Select//** button.+Go the **//​Settings//​** then select **//​Device//​**, then **//About//** and finally **//Network//**
 \\ \\
 \\ \\
Line 169: Line 165:
 **__//Step 5//__** **__//Step 5//__**
 \\ \\
-Select your Wi-Fi network+Note down the **IP Address**, **Gateway** and the **Subnet Mask** you will need these details later. ​ The easiest way is to take a photo of the screen, with a phone or tablet, this photo will also help StreamVia troubleshoot any problems with you if required.
 \\ \\
 \\ \\
Line 175: Line 171:
 **__//Step 6//__** **__//Step 6//__**
 \\ \\
-Enter your Wi-Fi password, but **do not** press Connect, instead click on **//Advanced//**+Go the **//​Settings//​** then select ​**//Network//**  
 +\\
 \\ \\
 \\ \\
-\\  
 **__//Step 7//__** **__//Step 7//__**
 \\ \\
-Enter the first three groups of numbers exactly ​the same as the IP address of your router. As an example, if your router IP is 192.168.1.1, then use the IP address 192.168.1.77 or something ​to that nature. The important part is to change ​the last digit so you get an IP from the same IP range as the router, this also needs to be unique on your network ​i.e not the same as other computers, tablets, etc.+Select your Wi-Fi network and forget Wi-Fi network by pressing ​the button with 3 lines on it on the remote, then press the **//​Select//​** button ​to confirm you wish to Forget ​the network.
 \\ \\
 \\ \\
Line 187: Line 183:
 **__//Step 8//__** **__//Step 8//__**
 \\ \\
-For the Default gateway enter the IP of your router+Select ​your Wi-Fi network
 \\ \\
 \\ \\
Line 193: Line 189:
 **__//Step 9//__** **__//Step 9//__**
 \\ \\
-Input 24 for the Network Prefix Length and Click Next  +Enter your Wi-Fi password, but **do not** press Connect, instead click on **//​Advanced//​**
-\\+
 \\ \\
 \\ \\
 +\\ 
 **__//Step 10//__** **__//Step 10//__**
 \\ \\
-Please enter the SmartStream DNS server(s) retrieved ​in Step 1 for DNS 1+Configure ​the **IP Address** you noted down in Step 5
 \\ \\
 \\ \\
Line 205: Line 201:
 **__//Step 11//__** **__//Step 11//__**
 \\ \\
-Please enter the SmartStream DNS server(s) retrieved ​in Step 1 for DNS 2+Configure ​the **Gateway** you noted down in Step 5
 \\ \\
 \\ \\
Line 211: Line 207:
 **__//Step 12//__** **__//Step 12//__**
 \\ \\
-Press **//Save//** or **//​Connect//​** and let the device connect to your network+If your Subnet Mask was 255.255.255.0,​ configure ​**24** for the Network Prefix Length. ​ If it was something else, please email us the photo from Step 5.
 \\ \\
 \\ \\
Line 217: Line 213:
 **__//Step 13//__** **__//Step 13//__**
 \\ \\
-Unplug the Fire TV, from your TV and any additional USB/power cables, so it is completely disconnected+For **//DNS 1//** and **//DNS 2//** please enter the SmartStream DNS server(s) retrieved in Step 1.
 \\ \\
 \\ \\
 \\ \\
 **__//Step 14//__** **__//Step 14//__**
 +\\
 +After entering DNS 2, click the '​Connect'​ button and the various settings will then be saved.
 +\\
 +\\
 +\\
 +**__//Step 15//__**
 +\\
 +Unplug the Fire TV, from your TV and any additional USB/power cables, so it is completely disconnected
 +\\
 +\\
 +\\
 +**__//Step 16//__**
 \\ \\
 Use the below link to sign in to SmartStream using your VPN username and password, this will activate SmartStream for your current broadband IP address. ​ It is recommended you do this from a computer. Use the below link to sign in to SmartStream using your VPN username and password, this will activate SmartStream for your current broadband IP address. ​ It is recommended you do this from a computer.
Line 235: Line 243:
 \\ \\
 \\ \\
-**__//​Step ​15//__**+**__//​Step ​17//__**
 \\ \\
 Plug the Fire TV back in to your TV and any power cables, so that it starts up. Plug the Fire TV back in to your TV and any power cables, so that it starts up.